Tools UK  
 
[ Home ] [ Up ] [ Catalogue ]  [ Terms & Conds ]   [ View Basket ] [ Checkout  ] [ Contact Us ] 

Left tabRIDGID POWER PIPE CUTTERRight tab


RIDGID NO.258 PIPE CUTTER RIDGID NO.258 PIPE CUTTER Ref: 50767
The RIDGID Model 258 Power Pipe Cutter cuts 21/2" to 8" schedule 10*/40 steel pipe, galvanized pipe, rigid conduit etc. at the job site or in the shop. Powered by the RIDGID No. 700 Power Drive, the 258 is a displacement cutter that provides square cuts. The operator controls the feeding rate by pumping the hydraulic foot pump throughout the operation. A square cut with minimal burr on either 21' or nipple lengths of pipe is achieved quickly** without abrasive dust, sparks, or open flame. Also, the RIDGID Pipe Roller for beveling can be used to rotate the pipe while a second operator uses a grinder to bevel the pipe.

Features
Square cut 21' or nipple lengths of pipe without effort.
Easily cuts by displacing instead of removing pipe material.
No abrasive dust, dangerous sparks, or open flame.
Quickly cuts steel pipe with minimal burr.
Great for cutting pipe for groove joining.
Heavy-duty design is perfect for field or shop use.
Adaptable for beveling.

Specifications
Cutting Capacity: Model 258 21/2" to 8" schedule.
10*/40 steel pipe.
Model 700 Power Drive. (Not Included, see page 4.15)
Power Drive RPM: 26-30 (no load).
Weight: 105 lbs. (excludes No. 700 Power Drive)
cuts 8.2mm wall thickness in steel 2.1/2" - 8" OD
cuts 12.7mm wall thickness in PVC 2.1/2" - 8" OD
cuts 3.1mm wall thickness in copper 2.1/2" - 8" OD
 




Price:2,563.10 (3,075.72 Including VAT at 20%)


Quantity:  


RIDGID NO.258XL PIPE CUTTER RIDGID NO.258XL PIPE CUTTER Ref: 58227
The RIDGID Model 258 Power Pipe Cutter cuts 21/2" to 8" schedule 10*/40 steel pipe, galvanized pipe, rigid conduit etc. at the job site or in the shop. Powered by the RIDGID No. 700 Power Drive, the 258 is a displacement cutter that provides square cuts. The operator controls the feeding rate by pumping the hydraulic foot pump throughout the operation. A square cut with minimal burr on either 21' or nipple lengths of pipe is achieved quickly** without abrasive dust, sparks, or open flame. Also, the RIDGID Pipe Roller for beveling can be used to rotate the pipe while a second operator uses a grinder to bevel the pipe.

Features
Square cut 21' or nipple lengths of pipe without effort.
Easily cuts by displacing instead of removing pipe material.
No abrasive dust, dangerous sparks, or open flame.
Quickly cuts steel pipe with minimal burr.
Great for cutting pipe for groove joining.
Heavy-duty design is perfect for field or shop use.
Adaptable for beveling.

Specifications
Cutting Capacity: Model 258 21/2" to 8" schedule.
10*/40 steel pipe.
Model 700 Power Drive. (Not Included, see page 4.15)
Power Drive RPM: 26-30 (no load).
Weight: 105 lbs. (excludes No. 700 Power Drive)
cuts 8.2mm wall thickness in steel 8"- 12" OD
 




Price:2,665.20 (3,198.24 Including VAT at 20%)


Quantity:  


RIDGID NO.258 PIPE CUTTER RIDGID NO.258 PIPE CUTTER Ref: 17871
RIDGID NO.258 PIPE CUTTER - COMES WITH 700 POWER DRIVE UNIT 230 VOLT
cuts 8.2mm wall thickness in steel 2.1/2" - 8" OD
cuts 12.7mm wall thickness in PVC 2.1/2" - 8" OD
cuts 3.1mm wall thickness in copper 2.1/2" - 8" OD
The RIDGID Model 258 Power Pipe Cutter cuts 21/2" to 8" schedule 10*/40 steel pipe, galvanized pipe, rigid conduit etc. at the job site or in the shop. Powered by the RIDGID No. 700 Power Drive, the 258 is a displacement cutter that provides square cuts. The operator controls the feeding rate by pumping the hydraulic foot pump throughout the operation. A square cut with minimal burr on either 21' or nipple lengths of pipe is achieved quickly** without abrasive dust, sparks, or open flame. Also, the RIDGID Pipe Roller for beveling can be used to rotate the pipe while a second operator uses a grinder to bevel the pipe.

Features
Square cut 21' or nipple lengths of pipe without effort.
Easily cuts by displacing instead of removing pipe material.
No abrasive dust, dangerous sparks, or open flame.
Quickly cuts steel pipe with minimal burr.
Great for cutting pipe for groove joining.
Heavy-duty design is perfect for field or shop use.
Adaptable for beveling.

Specifications
Cutting Capacity: Model 258 21/2" to 8" schedule.
10*/40 steel pipe.
Model 700 Power Drive. (Not Included, see page 4.15)
Power Drive RPM: 26-30 (no load).
Weight: 105 lbs. (excludes No. 700 Power Drive)
 




Price:4,445.80 (5,334.96 Including VAT at 20%)


Quantity:  


RIDGID NO.258 PIPE CUTTER RIDGID NO.258 PIPE CUTTER Ref: 17881
RIDGID NO.258 PIPE CUTTER - COMES WITH 700 POWER DRIVE UNIT 110 VOLT
cuts 8.2mm wall thickness in steel 2.1/2" - 8" OD
cuts 12.7mm wall thickness in PVC 2.1/2" - 8" OD
cuts 3.1mm wall thickness in copper 2.1/2" - 8" OD
The RIDGID Model 258 Power Pipe Cutter cuts 21/2" to 8" schedule 10*/40 steel pipe, galvanized pipe, rigid conduit etc. at the job site or in the shop. Powered by the RIDGID No. 700 Power Drive, the 258 is a displacement cutter that provides square cuts. The operator controls the feeding rate by pumping the hydraulic foot pump throughout the operation. A square cut with minimal burr on either 21' or nipple lengths of pipe is achieved quickly** without abrasive dust, sparks, or open flame. Also, the RIDGID Pipe Roller for beveling can be used to rotate the pipe while a second operator uses a grinder to bevel the pipe.

Features
Square cut 21' or nipple lengths of pipe without effort.
Easily cuts by displacing instead of removing pipe material.
No abrasive dust, dangerous sparks, or open flame.
Quickly cuts steel pipe with minimal burr.
Great for cutting pipe for groove joining.
Heavy-duty design is perfect for field or shop use.
Adaptable for beveling.

Specifications
Cutting Capacity: Model 258 21/2" to 8" schedule.
10*/40 steel pipe.
Model 700 Power Drive. (Not Included, see page 4.15)
Power Drive RPM: 26-30 (no load).
Weight: 105 lbs. (excludes No. 700 Power Drive)
 




Price:3,418.00 (4,101.60 Including VAT at 20%)


Quantity: